Opcom Key Fob Programming

| 15-09-2021
[RAND-1-100] Comments

Download Instructions

Hood Pin Equipped Vehicles

Opcom Key Fob Programming Entry

Dodge Key Fob Programming Guide. If you've replaced the battery and checked the connections in your key fob but your car still isn't responding, you may need to reprogram the key fob. To reprogram your Dodge key fob, follow the four easy steps below. These steps will also work on select Chrysler, Jeep, and RAM models in Bartlett and Streamwood. Sorry if this reapeats earlier requests. I am trying to reprogram a key fob I got of ebay. I am using an opcom (chineese clone!) All connects through to body then I try to program comes up with delete all fob and reprogram whwn I press reprogram I get See Checking Procedure Before Programming. I ordered this Key Fob for my 2008 Mazda 6, a few days later I received the unit and went to a local key shop here in Tucson and had the key cut and the fob programmed for my car. The unit worked perfectly. The local Mazda car dealer wanted to charge me $180.00 for the fob/key unit plus cutting the key and the programming. You can program or reprogram your keyless-entry FOB system in just minutes from your vehicle. Programming requires only your ignition key and your keyless remote itself and you will be ready to use the device immediately with your car, truck or SUV.

Fob
  1. Press and hold the hood-pin for 4 seconds
    What is a hood-pin?
  2. Release the hood-pin (the parking lights will turn on)
    What are parking lights?

  3. While the parking lights are on, press the hood-pin once more and release immediately
  4. The parking lights will now stay on for up to 20 seconds
  5. Before the parking lights go out, turn the ignition key ON (RUN Position) and immediately to the OFF position
  6. Press and HOLD the LOCK button of the key fob you are trying to program and keep it held down until the parking lights flash 5 times quickly (may be followed by 2 slow flashes, not all the time though)
  7. The key fob has now been stored to memory

If you have additional key fobs to program, repeat step 5 and 6 at this time. *Systems can hold a maximum of 4 remotes

Here is a YouTube video we have made to assist with programming:

NO HOOD PIN? How To Program

Opcom Key Fob Programming Tutorial

Option 1: (if the antenna on your windshield HAS an Antenna Programming Assistance Button (A.P.A.B.)

  1. Make sure the hood is closed
  2. Turn the ignition key to the IGNITION ON (RUN) position
  3. Within 5 seconds, press the programming button on the antenna twice for 1 second each time. THE LED WILL COME ON SOLID.
  4. You now have 20 seconds to select one of the sub-menus (proceed with transmitter programming procedure below:

Corsa C Key Fob Programming Opcom

Note: To exit programming mode, press on the antenna button once (the LED will come ON) and release.

Transmitter Programming Programming Procedure

  1. Before the lights go out, turn the ignition key to the Ignition Off position, then to On (Run) position and immediately to the OFF position. OFF/ON/OFF
  2. Press and hold the LOCK button and keep it down until the parking lights flash 5 times quickly. The transmitter has been stored to memory AFTER the 5 flashes, meaning programming is completed.

Opcom Key Fob Programming Fob

Opcom Key Fob Programming

You must repeat the above process to add additional transmitters.

Opcom Key Fob Programming Keyless

Option 2: (If the A.P.A.B. button is not present on the antenna)

Here is a YouTube video we have made to assist with programming if your vehicle does NOT have a hood pin:

Wondering what a hood pin is, or where it is located?

Need to purchase a hood pin?